Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Managing Device Security 6-39
v1.0, May, 2008
To display the Protected Ports Membership page:
1. Click the Security > Traffic Control > Protected Ports link.
2. Click Refresh to refresh the page with the most current data from the switch.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you make changes to the page, click Apply to apply the changes to the system.
Configuration changes take effect immediately.
Configuring Access Control Lists
Access Control Lists (ACLs) ensure that only authorized users have access to specific resources
while blocking off any unwarranted attempts to reach network resources. ACLs are used to
provide traffic flow control, restrict contents of routing updates, decide which types of traffic are
forwarded or blocked, and above all provide security for the network. GS700TR Smart Switch
software supports IPv4 and MAC ACLs.
Figure 6-24
Table 6-29. Protected Ports Membership Fields
Field Description
Protected Port(s) The selection list consists of physical ports, protected as well as unprotected.
The protected ports are highlighted in order to differentiate between them. No
traffic forwarding is possible between two protected ports. If left unconfigured,
the default state is Unprotected.