Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Managing Device Security 6-41
v1.0, May, 2008
To display the MAC ACL page:
1. Click Security > ACL. The MAC ACL page is under the Basic link.
The MAC ACL table shows the number of ACLs currently configured in the switch and the
maximum number of ACLs that can be configured. The current size is equal to the number of
configured IPv4 ACLs plus the number of configured MAC ACLs.
2. To add a MAC ACL, enter information into the appropriate fields and click Add.
3. To delete a MAC ACL, select the check box next to the Name field, then click Delete.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. If you make changes to the page, click Apply to apply the changes to the system.
Figure 6-25
Table 6-30. MAC ACL Table Fields
Field Description
Name Enter a name for the MAC ACL.. The name string may include
alphabetic, numeric, dash, underscore, or space characters only. The
name must start with an alphabetic character.
Rules Shows the number of rules currently configured for the MAC ACL.
Direction Shows the direction of packet traffic affected by the MAC ACL, which
can be Inbound or blank.