Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Managing Device Security 6-47
v1.0, May, 2008
The top table shows the current size of the ACL table versus the maximum size of the ACL
table. The current size is equal to the number of configured IPv4 plus the number of
configured MAC ACLs. The maximum size is 100.
2. To add an IP ACL, enter an ACL ID in the appropriate field, and then click Add.
3. To delete an IP ACL, select the check box associated withe ACL ID, and then click Delete.
The Delete button only appears if a configured IP ACL is selected.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Figure 6-29
Table 6-34. IP ACL Configuration Fields
Field Description
IP ACL Enter an ACL ID. The ID is an integer in the following range:
• 1-99: Creates an IP Standard ACL, which allows you to permit or deny
traffic from a source IP address.
• 100-199: Creates an IP Extended ACL, which allows you to permit or
deny specific types of layer 3 or layer 4 traffic from a source IP
address to a destination IP address. This type of ACL provides more
granularity and filtering capabilities than the standard IP ACL.
Rules Shows the number of rules currently configured for the IP ACL.
Type Identifies the ACL as either a standard or extended IP ACL.