Filter
Top Products
GS700TR Smart Switch Software Administration Manual
6-50 Managing Device Security
v1.0, May, 2008
To display the IP extended Rules page:
1. Click Security > ACL, then click the Advanced > IP Extended Rules link.
2.To add an IP ACL rule, select the ACL ID to add the rule to, and then click Add. The Extended
ACL Rules configuration page displays as shown in
Figure 6-32 on page 6-51.
3. To delete an IP rule, select the check box associated with the rule, and then click Delete.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Note: There is an implicit “deny all” rule at the end of an ACL list. This means that if an
ACL is applied to a packet and if none of the explicit rules match, then the final
implicit “deny all” rule applies and the packet is dropped.
Figure 6-31