Filter
Top Products
GS700TR Smart Switch Software Administration Manual
6-54 Managing Device Security
v1.0, May, 2008
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. Click Apply to save any changes to the running configuration.
Figure 6-33
Table 6-37. IP ACL Binding Configuration Fields
Field Description
ACL ID Select an existing IP ACL.
Direction Specifies the packet filtering direction for ACL. The only valid direction
is Inbound, which means the IP ACL rules are applied to traffic entering
the port.
Sequence Number An optional sequence number may be specified to indicate the order of
this access list relative to other access lists already assigned to this
interface and direction. A lower number indicates higher precedence
order. If a sequence number is already in use for this interface and
direction, the specified access list replaces the currently attached
access list using that sequence number. If the sequence number is not
specified by the user, a sequence number that is one greater than the
highest sequence number currently in use for this interface and
direction will be used. Valid range is (1 to 4294967295).
Port Selection Table Specifies list of all available valid interfaces for ACL binding. All non-
routing physical interfaces and interfaces participating in LAGs are
listed. Click the Unit link to view all the available interfaces.