Filter
Top Products
GS700TR Smart Switch Software Administration Manual
6-56 Managing Device Security
v1.0, May, 2008
VLAN ACL Configuration
Use this page to configure ACLs to apply to VLANs on your system rather than to ports. At the
bottom of the page, the table displays any currently-configured ACLs for the selected VLAN.
To display the VLAN ACL Configuration page:
1. Click Security > ACL, then click the Advanced > VLAN ACL Configuration link.
The table at the bottom of the page displays any currently configured ACLs on the selected
VLAN interface.
Figure 6-35
Table 6-39. VLAN-Based ACL Configuration
Field Description
VLAN ID Select the configured VLAN ID that you want to associate an ACL to.
Direction Specifies the packet filtering direction for the ACL. The system supports
Inbound filtering, which means the system applies the ACL rules to packets as
they enter the interface.
ACL Type Use the menu to select the ACL type to which incoming packets are matched.
Packets can be matched to IPv4- and MAC-based ACLs.
IP ACL The dropdown menu contains all configured IP ACLs. Select the IP ACL to
apply to the interface. This field is only visible if you select IP ACL as the ACL
Type.