Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Monitoring the System 7-15
v1.0, May, 2008
• “Event Logs” on page 7-22
Memory Logs
The in-memory log stores messages in memory based upon the settings for message component
and severity. Use the Memory Logs page to set the administrative status and behavior of logs in the
system buffer.
To access the Memory Log page:
1. Click the Monitoring > Logs tab, and then click the Memory Log link.
Figure 7-5
Table 7-5. Memory Log Configuration Fields
Field Description
Admin Status Determines whether to log messages.
• Enable: Enables system logging.
• Disable: Prevents the system from logging messages.
Behavior Indicates the behavior of the log when it is full.
• Wrap: When the buffer is full, the oldest log messages are deleted as
the system logs new messages.
• Stop on Full: When the buffer is full, the system stops logging new
messages and preserves all existing log messages.