Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Monitoring the System 7-19
v1.0, May, 2008
Server Log Configuration
Use the Server Log Configuration page to allow the switch to send log messages to the remote
logging hosts configured on the system.
To access the Server Log Configuration page:
1. Click the Monitoring > Logs tab, and then click the Server Log link.
Figure 7-7
Table 7-9. Server Log Configuration Fields
Field Description
Admin Status Specifies whether to send log messages to the remote syslog hosts configured
on the switch:
• Enable: Messages will be sent to all configured hosts (syslog collectors or
relays) using the values configured for each host.
• Disable: Stops logging to all syslog hosts. Disable means no messages will
be sent to any collector/relay.
Local UDP Port Specifies the port on the switch from which syslog messages are sent. The
default port is 514.
Messages Relayed The number of messages forwarded by the syslog function to a syslog host.
Messages forwarded to multiple hosts are counted once for each host.
Messages Ignored The number of messages that were ignored.