Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Monitoring the System 7-21
v1.0, May, 2008
Trap Logs
Use the Trap Logs page to view information about the SNMP traps generated on the switch.
To access the Trap Logs page:
1. Click the Monitoring > Logs tab, and then click the Trap Logs link.
The page also displays information about the traps that were sent.
Figure 7-8
Table 7-11. Trap Log Statistics
Field Description
Number of Traps
Since Last Reset
The number of traps that have occurred since the switch last reboot.
Trap Log Capacity The maximum number of traps stored in the log. If the number of traps
exceeds the capacity, the entries will overwrite the oldest entries.
Number of Traps
Since Log Last
Viewed
The number of traps that have occurred since the traps were last displayed.
Displaying the traps by any method (terminal interface display, Web display,
upload file from switch etc.) will cause this counter to be cleared to 0.