Filter
Top Products
GS700TR Smart Switch Software Administration Manual
7-24 Monitoring the System
v1.0, May, 2008
1. Click Monitoring > Port Mirroring in the navigation menu.
2. To delete a mirrored port, select the check box next to the mirrored port, and then click Delete.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. To add a mirrored port, select the source port, enter the destination port number (g1, g2,...) in
the Destination port field. Select Enable from the Session Mode menu, and then click Apply.
Figure 7-10
Table 7-14. Multiple Port Mirroring Fields
Field Description
Source Port Lists all the ports on the system. Select the check box next to a port to
configure it as a source port.
Destination Port After you select a source port, enter the port to which port traffic may be
copied in g1, g2,...format. You can only configure one destination port
on the system.
Session Mode Select Enable to turn on Multiple Port Mirroring. Select Disable to turn
off port mirroring. The session mode is a global value.
Mirroring Port If the port is configured as a source port, the field value is Mirrored.