Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Maintenance 8-3
v1.0, May, 2008
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. Click Apply to send the updated configuration to the switch. Configuration changes take place
immediately.
Reset Configuration to Defaults
Use the Factory Default page to reset the system configuration to the factory default values.
To access the Factory Defaults page:
1. Click Maintenance > Reset > Factory Default in the navigation tree.
2. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest
value of the switch.
3. Click Apply to restore the factory default settings. The action takes place immediately.
Upload File From Switch
Use the File Upload page to upload configuration (ASCII) and image (binary) files from the switch
to the TFTP server.
Note: For information about configuring network information, see “Connecting the
Switch to the Network” on page 1-1.
Figure 8-3