Filter
Top Products
GS700TR Smart Switch Software Administration Manual
8-10 Maintenance
v1.0, May, 2008
To display the Dual Image Configuration page:
1. Click Maintenance > File Management > Dual Image > Dual Image Configuration in the
navigation menu.
The Active Image page contains the following fields:
2. Click Activate Image to make the image that is selected in the Image Name field the next
active image for subsequent reboots.
3. If the file you uploaded contains the boot loader code only, click Update Bootcode.
4. Click Refresh to reload the page and display the most current information.
Figure 8-7
Table 8-4. Dual Image Configuration Fields
Field Description
Image Name Select image1 or image2 from the dropdown menu to display or configure information
about that software image.
Current Active Displays name of current active image.
Image
Description
If desired, enter a descriptive name for the software image.
Note: After activating an image, you must perform a system reset of the switch in
order to run the new code.