Filter
Top Products
GS700TR Smart Switch Software Administration Manual
8-12 Maintenance
v1.0, May, 2008
2. Click Refresh to display the latest information from the router.
3. For information about how to update or change the system images, see “Dual Image
Configuration” on page 8-9.
Ping
Use the Ping page to tell the switch to send a Ping request to a specified IP address. You can use
this feature to check whether the switch can communicate with a particular network host.
To access the Ping page:
1. Click Maintenance > Troubleshooting > Ping in the navigation menu.
Table 8-5. Dual Image Status Fields
Field Description
Unit Displays the unit ID of the switch.
Image1 Ver Displays the version of the image1 code file.
Image2 Ver Displays the version of the image2 code file.
Current-active Displays the currently active image on this unit.
Next-active Displays the image to be used on the next restart of this unit.
Image1 Description Displays the description associated with the image1 code file.
Image2 Description Displays the description associated with the image2 code file.
Figure 8-9