Filter
Top Products
GS700TR Smart Switch Software Administration Manual
2-8 Configuring System Information
v1.0, May, 2008
To configure the time through SNTP:
1. Select the Clock Source as SNTP by checking the radio button.
2. When the Clock Source is set to ‘SNTP’, the Date and Time fields are grayed out (disabled).
The switch gets the date and time from the network.
3. Use the menu to select the Time Zone in which the switch is located, expressed as the number
of hours and, optionally, the number of minutes difference from Coordinated Universal Time
(UTC) with Offset Hours and Offset Minutes.
4. Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
Figure 2-3