Filter
Top Products
GS700TR Smart Switch Software Administration Manual
2-12 Configuring System Information
v1.0, May, 2008
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you change any of the settings on the page, click Apply to send the updated configuration to
the switch. Configuration changes take effect immediately.
SNTP Server Configuration
Use the SNTP Server Configuration page to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
To display the SNTP Server Configuration page:
1. Click System > Management > Time > SNTP Server Configuration in the navigation tree.
Figure 2-6
Table 2-5. SNTP Server Configuration Fields
Field Description
Server Type Specifies the address type of the configured SNTP server to view or
modify information about, or select Add to configure a new SNTP server.
You can define up to three SNTP servers.
Select IPv4 if you entered an IPv4 address or DNS if you entered a
hostname. The default value is Unknown.
Address Enter the IP address or the hostname of the SNTP server.