Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring System Information 2-29
v1.0, May, 2008
2. If you make any changes to the page, click Apply to apply the new settings to the system.
Interface Configuration
Use the LLDP Interface Configuration page to specify LLDP parameters that are applied to a
specific interface.
To display the LLDP Interface Configuration page:
1. Click System > LLDP > Interface Configuration in the navigation tree.
Figure 2-17
Table 2-18. LLDP Global Configuration Fields
Field Description
Transmit Interval Specifies the interval at which frames are transmitted. The default is 30
seconds, and the valid range is 1-32768 seconds.
Transmit Hold Multiplier Specifies multiplier on the transmit interval to assign to Time-to-Live
(TTL). The default is 4, and the range is 2-10.
Re-Initialization Delay Specifies delay before a re-initialization. The default is 2 seconds, and
the range is 1-10 seconds.
Notification Interval Limits the transmission of notifications. The default is 5 seconds, and
the range is 5-3600 seconds.