Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring System Information 2-45
v1.0, May, 2008
• “BOOTP/DHCP Status” on page 2-46
BOOTP/DHCP Relay Configuration
Use the BOOTP/DHCP Relay page to configure and display a BOOTP/DHCP relay agent.
To display the page:
1. Click System > Services > DHCP Relay in the navigation tree.
Figure 2-30
Table 2-28. BOOTP/DHCP Relay Agent Configuration Fields
Field Description
Maximum Hop Count Enter the maximum number of hops a client request can take before
being discarded.
Server IP Address Enter either the IP address of the BOOTP/DHCP server or the IP
address of the next BOOTP/DHCP Relay Agent.
Admin Mode Select Enable or Disable. When you select Enable, BOOTP/DHCP
requests are forwarded to the IP address you entered in the Server IP
address field.