Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Switching Information 3-7
v1.0, May, 2008
To access the LAG Membership page:
1. Click Switching > LAG > Basic > LAG Membership in the navigation tree.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take effect immediately.
LACP Configuration
To display the LACP Configuration page:
1. Click Switching > LAG > Advanced > LACP Configuration in the navigation tree.
Figure 3-4
Table 3-4. LAG Membership Fields
Field Description
LAG ID Identifies the LAG (port channel) with the interface naming convention.
LAG Name Enter the name you want assigned to the LAG. You may enter any
string of up to 15 alphanumeric characters. A valid name has to be
specified in order to create the LAG.
Port Selection Table Select the ports as members of this LAG.