Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Switching Information 3-11
v1.0, May, 2008
2. Click Add to add a new VLAN to the switch.
3. Click Delete to delete a selected VLAN from the switch.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take effect immediately.
VLAN Membership Configuration
Use this page to configure VLAN Port Membership for a particular VLAN. You can select the
Group operation through this page. Click the Unit 1 link to see the ports to be configured.
To display the VLAN Membership Configuration page:
1. Click Switching > VLAN > Advanced > VLAN Membership in the navigation tree.
Table 3-7. VLAN Configuration Fields
Field Description
VLAN ID Specify the VLAN Identifier for the new VLAN. (You can only enter data
in this field when you are creating a new VLAN.) The range of the VLAN
ID is (1 to 4078).
VLAN Name Use this optional field to specify a name for the VLAN. It can be up to 32
alphanumeric characters long, including blanks. The default is blank.
VLAN ID 1 is always named “Default.”
VLAN Type This field identifies the type of the VLAN you are configuring. You
cannot change the type of the default VLAN (VLAN ID = 1): it is always
type “Default.” When you create a VLAN, using this screen, its type will
always be “Static.” A VLAN that is created by GVRP registration initially
has a type of “Dynamic.” You can use this menu to change its type to
“Static.”