Filter
Top Products
GS700TR Smart Switch Software Administration Manual
Configuring Switching Information 3-13
v1.0, May, 2008
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take place immediately.
Port VLAN ID Configuration
Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port.
To access the Port PVID Configuration page:
1. Click Switching > VLAN > Advanced > Port PVID Configuration in the navigation tree.
Table 3-8. VLAN Membership Configuration Fields
Field Description
VLAN ID Select the VLAN Identifier for which you want to display or configure
data.
Group Operation Use this field to select all the ports and configure them. Possible values
are:
• Untag All: Select all the ports on which all frames transmitted from
this VLAN will be untagged. All the ports will be included in the VLAN.
• Tag All: Select the ports on which all frames transmitted for this VLAN
will be tagged. All the ports will be included in the VLAN.
• Remove All: This selection has the effect of excluding all ports from
the selected VLAN.
VLAN Name This field identifies the name for the VLAN you selected. It can be up to
32 alphanumeric characters long, including blanks. The default is blank.
VLAN ID 1 is always named “Default.”
Untagged/Tagged Port
Members
Click Untagged Port Members or Tagged Port Members to see the port
list and use it to add the ports you selected to this VLAN. Each port has
three modes:
• Tagged: Select the ports on which all frames transmitted for this
VLAN will be tagged. The ports that are selected will be included in
the VLAN.
• Untagged: Select the ports on which all frames transmitted for this
VLAN will be untagged. The ports that are selected will be included in
the VLAN.
VLAN Type This field identifies the type of the VLAN you selected. Possible values
are:
• Default: The default (VLAN ID = 1) is always present.
• Static: A VLAN that you have configured using this screen.