Filter
Top Products
Hardware Setup
13
JNR1010v2 N150 Wireless Router
Cable Your Router
The installation guide that came in the box has a cabling diagram on the first page. This
section describes how to connect the router, the computer, and the cable or DSL broadband
modem, and provides detailed illustrations.
1. Unplug and turn of
f the cable or DSL broadband modem.
2. If your modem has a backup battery
, remove it.
3. Locate the Ethernet cable (
1) that connects your computer to the modem.
2
1
1
2
4. Disconnect the cable from the modem (2).
You connect it to the router later.
5. Insert an Ethernet cable into your modem and into the router’
s Internet port.
(Not included)