Filter
Top Products
Get Started with NETGEAR genie
18
JNR1010v2 N150 Wireless Router
Log In to Your Router After Installation
When you first set up your router, NETGEAR genie automatically starts when you launch an
Internet browser on a computer that is connected to the router.
To use NETGEAR genie again to view or change settings for the router:
1. Launch your browser from a computer or wireless device that is connected to the router.
2. Enter http://www
.routerlogin.net in the web browser address bar.
A login screen displays.
3. Enter the router user name and password.
The default user name is admin. The default password is password. The user name and
password are case-sensitive.
Note: The router user name and password are different from the user name
and password for logging in to your Internet connection. For more
information, see Types of Logins and Access on page 16.
4. Click the OK button.
Upgrade Router Firmware
When you set up your router and are connected to the Internet, the router automatically
checks for you to see if newer firmware is available. If it is, a message is displayed on the top
of the screen. The message might be A router firmware upgrade is available, or a similar
message.
To upgrade the firmware after the router has detected newer firmware and displays a
message:
1. Click the message.
The Firmware Upgrade Assistant displays.