Filter
Top Products
genie ADVANCED Home
42
JNR1010v2 N150 Wireless Router
b. Enter the client security PIN.
c. Click the Next button.
Within two minutes, go to the client and use its WPS software to let the client join
the network.
You do not need to enter a password.
While the router attempts to add the WPS-capable client, the WPS LED on the
front of the router blinks green. When the router establishes a WPS connection,
the LED is solid green, and the router WPS screen displays a confirmation
message.
d. To add another WPS client to your network, repeat this procedure.
WAN Setup
You can configure a DMZ (demilitarized zone) server, change the maximum transmit unit
(MTU) size, and enable the router to respond to a ping on the WAN (Internet) port. The router
does not support a VPN endpoint, but it allows traffic from VPN endpoints to pass through.
To change the WAN settings:
1. Log in to the router.
For more information, see Log In to Your Router After Installation on page 18.
2. Select ADVANCED > Setup > WAN Setup.