Filter
Top Products
Advanced Settings
65
JNR1010v2 N150 Wireless Router
To configure the router as a repeater:
1. Log in to the router.
For more information, see Log In to Your Router After Installation on page 18.
2. Select ADV
ANCED > Advanced Setup > Wireless Repeating Function.
The Wireless Repeating Function screen displays. The wireless MAC address of the
router displays onscreen.
3. Select the Enable W
ireless Repeating Function check box.
4. Select the W
ireless Repeater radio button.
5. Complete the Repeater IP Address field.
This IP address must be in the same subnet as the base station, but different from the
LAN IP address of the base station.
6. T
o prevent wireless clients from associating with the repeater and allow LAN client
associations only, select the Disable Wireless Client Association check box.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the repeater
.
7. In the Base Station MAC Address field, enter the MAC addresses for the access point that
will function as the base station.
8. Click the Apply button.
Your changes are saved.
9. V
erify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the base station or a repeater can
connect to the Internet.
Any computer that is connected to the base station can share