Nextel comm IR1200 Modem User Manual


 
Vehicle Installation
RFM-4200-5015 Rev1
21
Mount the Modem
The following table lists the steps for mounting the iR1200 data modem in a
vehicle.
1 Determine a convenient location in the vehicle.
2 Use the iR1200 modem and mark the positions of the holes
on the mounting surface.
3 Drill the holes in the marked location.
4 Mount the unit using the #10 sheet metal screws.
Mounting the Antenna(s)
The location of the antenna should be chosen carefully.
!
Important things to consider when installing the
antenna equipment.
Installation of recommended equipment must be
installed in accordance with Nextel’s installation
instructions.
To assure compliance with United States FCC
regulations on RF exposure, equipment must be
installed in such a way as to maintain a separation
of at least 8 inches (20 cms) between the antenna
and the human body.
Ensure that the antenna is properly installed
external to the vehicle and in accordance with the
requirements of the antenna manufacturer/supplier.
Use only an approved antenna. Unauthorized
antennas, modifications or attachments could impair
call quality, damage the modem, or result in the
violation of FCC mandates.