Filter
Top Products
Managing M1112
E Copyright Nokia Networks Oy
C33907001SE_00
5-3
for all relevant interfaces. The result is that IP packets will be routed
and all other packets will be bridged. In the configuration example
below, LAN interface routes IP traffic and bridges all other protocols.
ATM VCC1 routes IP traffic and ATM VCC2 interfaces bridges all
traffic.
M1112> show config running
eth
ip address 192.168.1.1 255.255.255.0
bridging
vcc1
pvc 0 101 ip-llc
ip address 10.98.16.1 255.255.255.0
vcc2
pvc 0 102 eth-llc
bridging
M1112>
5.1.3 Routing/tunneling IP, bridging all protocols including IP
When IP packets that are received from LAN must be routed/tunneled
to some ATM VCC and bridged to some other ATM VCC, then the
VBRIDGE interface must be used as this common IP interface for all
bridged interfaces. LAN interface is in this case configures as bridge
only.
M1112> show config running
eth
bridging
vcc1
pvc 0 101 ip-llc
ip address 10.98.16.1 255.255.255.0
vcc2
pvc 0 102 tunneled-ppp-vc
vcc3
pvc 0 103 eth-llc
bridging
vbridge
ip address 192.168.1.1 255.255.255.0
M1112>