Filter
Top Products
Managing M1112
E Copyright Nokia Networks Oy
C33907001SE_00
5-53
Command Switch on/off RIP receive function on ATM channel
Description Switches on/off RIP receive function. When enabled,
M1112 receives Routing Information Protocol mess-
ages from other routers.
Syntax [no] ip rip-receive {rip-receive-mode}
Arguments no switches RIP receive function off.
v1 receive-mode selects RIP version 1.
v2 receive-mode selects RIP version 2.
both-v1v2 receive-mode selects both RIP version 1
and version 2.
Example
M1112(conf-vccx)#ip rip-receive v1
M1112(conf-vccx)#
Command Enable Network Address Port Translation
Description Enables Network Address Port Translation.
Syntax [no] ip napt
Arguments no switches NAPT function off.
Example
M1112(conf-vccx)#ip napt
M1112(conf-vccx)#