Filter
Top Products
Managing M1112
E Copyright Nokia Networks Oy
C33907001SE_00
5-7
1. Use CLI to issue
install tftp:/<ip-address>/Gx1x2200.R00 command,
where <ip-address is the IP address of the TFTP server
containing the new software and
Gx1x2200.R00 is the name of the
file to be downloaded. The command copy
tftp:/<ip-address>/Gx1x2200.R00 image.exe can be used
alternatively.
2. After you will see transfer status SUCCESSFUL
message, restart M1112 to activate the new software.
Downloading configuration or application from monitor
Monitor is a small application that is executed before the actual
software image is started. Typically the Monitor automatically loads
the application file image.exe. You can activate the Monitor by
pressing “m” followed by “o” in the very beginning of the system
startup:
local MAC=00:40:43:02:36:72; Using M111/850 eth conf
Type ’m’ (fast) followed by ’o’ (in 10 sec) to
activate Monitor
Nokia Networks (C) 1999
Nokia Boot
B-R0.0.0. built on Apr 4 2000 11:27:55
MON>
The following commands are available for file handling in the
Monitor:
D rename
D delete
D dir
M1112 has two methods of retrieving files:
D TFTP
D XMODEM
You can retrieve files from a TFTP server using the commands in the
following example:
MON>ipa 192.168.1.1
ip=192.168.1.1
ipserver=0.0.0.0
ipgw=0.0.0.0
serverfile=
MON>ips 192.168.1.100