Filter
Top Products
Managing M1112
E Copyright Nokia Networks Oy
C33907001SE_00
5-51
Command Switch on/off PPP authentication
Description Switches PPP authentication on/off on the specified
ATM channel.
Syntax [no] ppp authentication {mode}
Arguments no switches off PPP authentication.
chap mode selects Challenge Handshake Authentica-
tion Protocol.
pap mode selects Password Authentication Protocol.
both-chap-pap mode selects both authentication
protocols.
Example
M1112(conf-vccx)#ppp authentication chap
M1112(conf-vccx)#
Command Set PPP username
Description Sets the username used in PPP authentication.
Syntax [no] ppp username <name-string>
Arguments no deletes PPP username.
name-string is your PPP username. The maximum
length of the username is 15 characters.
Example
M1112(conf-vccx)#ppp username ut32aj
M1112(conf-vccx)#
Command Set PPP password
Description Sets the password used in PPP authentication.
Syntax [no] ppp password <passwd-string>
Arguments no deletes PPP password.
passwd-string is the PPP password. The password
must be 4...15 characters long.
Example
M1112(conf-vccx)#ppp password jfddslfj
M1112(conf-vccx)#