Filter
Top Products
Managing M1112
E Copyright Nokia Networks Oy
C33907001SE_00
5-47
Password level command
Command Assign new password
Description Switches password on/off and sets a new password for
different user levels. Note, that you must assign admin
password before you can assign other passwords.
When removing passwords, admin password must be
removed last.
Syntax [no] {user | bridge-user | router-user | pptp-user | napt-
user | admin} <passwd-string>
Arguments no switches off user password.
user argument sets the user privilege level password.
User password gives no access to the configuration
mode. Also, firmware download is not allowed on the
user privilege level.
bridge-user sets the bridge-user privilege level
password. Bridge user can set static routes and enable
VBRIDGE IP address.
router-user sets the router-user privilege level pass-
word. Router user can change log levels and host-
name.
pptp-user sets the PPTP-user privilege level pass-
word. PPTP user can change VCCx description, DHCP,
DNS and LAN/VBRIDGE configurations.
napt-user set the NAPT-user privilege level pass-
word. NAPT user can change VCCx description, LAN/
VBRIDGE, NAPT servers (pinholes), PPP username/
password/mode/autostop, DHCP, DNS configurations,
and set static routes.
admin sets the administrator privilege level password.
Administrator can change all configuration parameters.
Only the administrator is allowed to use file handling
commands (copy, rename, etc.).
passwd-string is the new password.
Example
M1112> admin nokia
M1112