Filter
Top Products
Remote Gateway 9150 Installation and Administration Guide 73
January 2005 Planning for Remote Gateway 9150 unit installation
Adding trunk interface modules
Initially, the Remote Gateway 9150 unit ships with no trunks. As connection
needs change, you can add up to four ISDN BRI S/T or U trunk interface
modules.
To determine how many trunk interface modules you need to install, use the
“Remote Gateway 9150 System expansion worksheet” on page 385. For
instructions on installing or replacing existing trunk interface modules, refer to
“Installing trunk interface or DSP application modules” on page 93.
Maximum configurations
The following table identifies the maximum configurations for the Remote
Gateway 9150 solution:
Component Maximum
RLC connections 1
Note: You must assign all users at the Remote
Gateway 9150 site to the same RLC.
DSP application modules 3
ISDN BRI modules 4
ISDN BRI lines 4
Note: Each line is associated with one ISDN BRI
module and provides two B-channels.
Trunk groups 10
Digital telephones 32
Analog telephone or fax
machine
1