Filter
Top Products
436 Remote Gateway 9150 Installation and Administration Guide
Display log definitions Standard 3.1
Statistic Definition
LOG NUMBER 37
DESCRIPTION This log indicates that an attempt to connect to a Remote Gateway
9100 Series unit on the specified medium failed.
1) If the same message is displayed with both IP and PSTN, in
succession, the specified remote cannot be reached.
2) If only one message displays with a specific medium while
connections on other medium are fine, it indicates a possible
attempt to connect on the medium due to:
a) Priority of the call that requires only that medium. Voice call
would have failed. Check for log number 55.
b) IP QoS state and priority level required a first attempt on the
specified medium. A voice call would have succeeded on the
other medium, though it cannot be guaranteed.
c) Attempt was made on receiving a QoS status message.
SEVERITY MAJOR
TASK Network Manager
PRODUCT RLC, 9150, 911x
CANCELLATION None
ACTION TO BE TAKEN Verify the following:
1) Correctness of configurations
2) Whether the network connections are proper
3) Status of the remote board
PARAMETERS 1) Remote Gateway 9100 Series unit ID
2) Medium on which the attempt failed
DISPLAYED TEXT Not able to connect to Remote Site: P1 on P2 medium
PRODUCES HOST PBX
ALARM AND ALERT
Yes