Remote Gateway 9150 Installation and Administration Guide 131
January 2005 Installing the Remote Gateway 9150 unit
5 Work with the administrator at the host PBX site to ensure that
! the RLC is enabled and working in its PBX slot (restart the RLC, if
necessary)
! the configuration of the IP address, telephone number, and security ID
on the RLC port are correct (if these items are used)
6 Verify that both the telecom and data networks are routing voice calls as
expected (that is, calls are not being blocked in any way).
7 Use Configuration Manager to examine the display logs for errors.
Note: Refer to the Configuration Manager Help application for a
complete listing of all display logs and the condition indicated by
each.