Filter
Top Products
212 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 3.1
Forward Busy/No
Answer: Transfer
to DN
Enter the DN where calls to this station are to be transferred if not
answered before the configured number of rings.
Note: This DN may be for a voicemail service or the DN of
another station. You must Enable Forward Busy/No Answer to
configure this setting.
Disabled Outbound
Digit Sequence
Click on the Not Configured checkbox to enable these fields.
This allows you to prevent this station from making certain type of
calls. To prevent these types of calls, enter the digits that normally
allow the calls to proceed.
Example: Enter 1976 to prevent calls to 1-976 numbers.
Note: You can configure five digit sequences. In order for calls to
be restricted, the dialed number must contain a matching string at
the beginning of the number.
Local Call Keys
(Key 1 and Key 2)
The number selected identifies the feature key position on the
telephone. Select the feature key you want to use for each local
call appearance key.
Note: If the port is configured as local and remote, Nortel
recommends that you use keys 8 and 9 and that you do not use
Key 0. You can select Key 0 if the port is configured as local only.
Valid options are 0 through 75, and NC (Not Configured).
The default is NC.
Field Description