Filter
Top Products
150 Remote Gateway 9150 Installation and Administration Guide
Using Configuration Manager Standard 3.1
Retrieve When you click on the Retrieve button on a property sheet,
the configuration stored in the buffer of the unit that you are
connected to (the latest configuration information) displays
in Configuration Manager.
If the retrieval is successful, the following message displays:
Data Received Successfully
Save to Flash When you choose Upload/Download → Save to Flash from
the Menu Bar, the information stored in the logged-on unit’s
buffer is saved to Flash memory. This prevents the
configuration from being lost if the unit loses power.
While in progress, the following message displays in the
status bar at the bottom of the screen:
Save to Flash
When the Save to Flash is completed, the Data Stored to
Flash dialog box displays.
Some changes require a restart of the unit after saving the
changes. If a restart is necessary, Configuration Manager
prompts you to do so.
Notes:
! You must click on the Send button or choose Upload/
Download
→ Send All from the Menu Bar before you
choose Upload/Download
→ Save to Flash. Perform a
Save to Flash as often as you think it is necessary, to keep
your configuration information safe.
Note: Do not ignore error messages in the Save to Flash
process. If Save to Flash fails, retry uploading and saving to
Flash. If the problem persists, check the file being uploaded
and report the problem to Nortel.
Operation Description