Filter
Top Products
412 Remote Gateway 9150 Installation and Administration Guide
Display log definitions Standard 3.1
Display logs
The display log functionality is significantly improved over prior releases of
Remote Gateway 9150. This appendix lists the 9150 system’s display log error
and status messages.
Statistic Definition
LOG NUMBER 0
DESCRIPTION This is a description of the log that is being generated.
SEVERITY NORMAL, WARNING, MINOR, MAJOR, CRITICAL
(Assigns one of these levels to the Log.)
TASK This is the task that originates the trap. This can be the full name or
an abbreviation. (For development use only.)
PRODUCT RLC, 9150, 911x (Lists all products that can generate this log.)
CANCELLATION This is a cross-reference to another log number that is the
complement of the current log (for example, QOS Transition/
Recovery, Link Up/Down.) This consists of a LOG NUMBER and
send Log IDType.
ACTION TO BE TAKEN: If the Severity is higher than NORMAL, this normally contains
information that would help the end user correct the problem, if
possible (for example, a Configuration Change), or give them
information about where the user can go for help.
PARAMETERS 1) description of parameter 1
2) description of parameter 2
.
.
.
N) description of parameter N
DISPLAYED TEXT This information describing the event that led to the occurrence of
this log appears in the Display Logs pop-up window.
PRODUCES HOST PBX
ALARM AND ALERT
This information indicates whether the host PBX produces an alarm
and alert.