Filter
Top Products
286 MG 1000B telephones
2. Press the Virtual soft key to activate Virtual Office Login.
In either case, the user is prompted for the User ID and the SCPW.
When a Branch User IP Phone re-powers, it registers with the MG 1000B
Call Server, and is automatically redirected to the main office. If another IP
Phone has already occupied the Main Office TN using the Virtual Office
login, the re-powered IP Phone is logged out at the main office Call Server
with the screen shown in Figure 109 "Virtual or Branch soft key display"
(page 285). The IP Phone remains registered to the main office TPS and is
listed with the isetShow command.
Test Local Mode
A user in Normal Mode can test the survivability functionality by entering
the Test Local Mode command, as shown in Figure 100 "Options menu"
(page 270). This results in the IP Phone registering to the MG 1000B Call
Server. The user should make a call and receive an MG 1000B-based or
PSTN-based call in Test Local Mode to be sure that the telephone works
in the event of a LAN/WAN failure.
Procedure 31
Using the Test Local Mode feature
Step Action
This procedure explains how to test the IP Phone for Local Mode operation.
The IP Phone has been configured using Branch User Config, overlays, or
TM 3.01, and is operating in Normal Mode.
1
Press the Services key (the key with the Globe icon).
The Options menu is displayed (see Figure 106 "Options menu"
(page 283)).
2
Use the navigation keys to highlight Test Local Mode.
3 Press the Select soft key.
The IP Phone displays "Local Mode".
4
To register again at the main office:
a. Press the Services key to display the menu in Figure 110
"Resume Normal Mode" (page 287).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.