Filter
Top Products
300 Dialing plan configuration
dials "2 87654321", zone-based digit manipulation does not
occur and the digit string remains unchanged.
•
CHG ZACB <zone> AC2 AC2
In this configuration, only calls dialed with AC2 undergo
zone-based digit manipulation. All Branch User calls dialed with
AC2 can then be routed to the MG 1000B PSTN.
For example, assume that AC1 = 1, AC2 = 2, and ZDP = 101. If a
Branch User dials "1 87654321", zone-based digit manipulation
does not occur and the digit string remains unchanged. If a
Branch User dials "2 87654321", ZDP is inserted in the dialed
digits to form a digit string of "2 101 87654321".
As part of the ZACB configuration, you can also change the dialed
Access Code, so if you dial AC2 it can be changed to AC1, or
vice versa. This provides more flexibility in the main office NARS
configurations. Normally, you do not need to change the Access
Code.
The Access Code dialed by the user is used internally by the Call
Server. It is not sent as part of the outpulsed digits (to the NRS or
to the trunks).
If a specified Access Code is used for both local and long-distance
dialing, then both types of calls will receive the specified routing.
2 Configure the ZDB property for the Branch Office zone in the main
office. Refer to IP Peer Networking Installation and Commissioning
(NN43001-313) .
LD 117 Define the zone digit manipulation for the Branch Office zone at the main office.
Command
Description
CHG ZDP <zone> <DialingCode1> <DialingCode2> <DialingCode3>
Define the dialing plan for the Branch Office zone, where
DialingCode1, DialingCode2, and DialingCode3 are inserted into
the dialed digits between the Access Code and the remainder of
the dialed number.
The ZDP and ZACB (Step 1) properties are used to configure
the digit manipulation behavior of the Branch Office zone.
The ZDP property is inserted between the Access Code
specified in the ZACB command and the dialed digits. This
zone-based digit manipulation allows the main office Call Server
and the network NRS to distinguish the Branch Users’ calls from
the main office users’ calls, and route them accordingly. The
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.