Filter
Top Products
Using the BayStack 410-24T 10BASE-T Switch
2-6
309985-B Rev 00
There are three slots located on the sides of the chassis. You can install the
switch flush to the rack or extended from the rack, depending on how you
install the mounting brackets.
2.
Attach a mounting bracket to each side of the switch using the supplied
screws (inserted from the bottom of the chassis, see Figure 2-3
).
Figure 2-3. Attaching Mounting Brackets
3.
Position the switch in the rack and align the holes in the mounting
bracket with the holes in the rack (see Figure 2-4
).
Figure 2-4. Installing the Switch in an Equipment Rack
BS41041A
1 = Flush with rack
2 = Extended from rack
1
2
BS41058A