Filter
Top Products
Using the BayStack 410-24T 10BASE-T Switch
E-4
309985-B Rev 00
Port Configuration (page 3-52) Unit 1
Status Enabled (for all ports)
LnkTrap On
Autonegotiation Enabled (for all ports
)
Speed/Duplex 100Mbs/Half (when
Autonegotiation is Disabled)
High Speed Flow Control
Configuration (page 3-54)
Unit 1 to 8 (depending on
configuration status)
Autonegotiation Enabled
Flow Control Disabled
Note:
The following two fields only appear when a single Phy
MDA with a separate redundant Phy port is installed.
Preferred Phy Right
Active Phy Read-only field indicating the
operational Phy port (Right,
Left, or None)
MultiLink Trunk Configuration (page 3-59) Trunk Members (Unit/Port) Zero-length string
STP Learning Normal
Trunk Mode Basic
Trunk Status Enabled
Trunk Name Trunk #1 to Trunk #6
MultiLink Trunk Utilization (page 3-61) Traffic Type Rx and Tx
Port Mirroring Configuration (page 3-64) Monitoring Mode Disabled
Monitor/Unit Port Zero-length string
Unit/Port X Zero-length string
Unit/Port Y Zero-length string
Address A 00-00-00-00-00-00
(no MAC address assigned)
Address B 00-00-00-00-00-00
(no MAC address assigned)
(continued)
Table E-1. Factory Default Settings for the BayStack 410-24T Switch
(continued)
Appears in this CI screen Field Default setting