Filter
Top Products
Using the BayStack 410-24T 10BASE-T Switch
3-72
309985-B Rev 00
IGMP Configuration
Figure 3-32
shows an example of the IGMP Configuration screen in a stacked
configuration. When installed as a standalone switch, the screen does not display
the Unit # field designation.
In this example, switch ports 8 and 14 of unit 1, ports 2 and 6 of unit 2, and port 16
of unit 4 are set to receive all IP multicast-related traffic. The configured ports are
VLAN port members of VLAN 5, and are called Static Router Ports.
Choose IGMP Configuration (or press g) from the IGMP Configuration Menu
screen to open the IGMP Configuration screen.
Display Multicast Group
Membership...
Displays the Multicast Group Membership screen (see “
Multicast Group
Membership” on page 3-76). This screen allows you to view all IP multicast
addresses that are active in the current LAN.
Return to Switch
Configuration Menu
Exits the IGMP Configuration Menu screen and displays the Switch
Configuration Menu screen.
Table 3-27. IGMP Configuration Menu Screen Options
(continued)
Option Description