Filter
Top Products
Getting Started with the Contivity Extranet Switch 4500
3-8
A sample display follows:
Main Menu:
1) Interfaces
2) Administrator
3) Private Default Route Gateway* 10.0.0.10
4) Public Default Route Gateway*
5) Create A User Management Tunnel (IPsec)
6) Restricted Management Mode
7) Allow HTTP Management TRUE
8) Check Point Firewall Options
9) Shutdown
P) Configure Serial Port
C) Controlled Crash
R) Reset System to Factory Defaults
E) Exit, Save and Invoke Changes
* Type 0.0.0.0 to delete.
Please select a menu choice (1 - 9,P,C,R,E): 1
Figure 3-3. Sample Serial Interface Display
3.
Follow the screen prompts. Some of the descriptions of the fields required to
complete this procedure are in the section “
Startup Configuration
Requirements” on page 3-2.
4.
After you complete the configuration, type
E
to Exit. You can then manage
the Switch from a Web browser.
IMPORTANT: This Administrator’s Password is also the Primary
Administrator’s Password. This password guarantees access to the Switch via
the serial port or a Web browser.