Filter
Top Products
Getting Started with the Contivity Extranet Switch 4500
5-2
a.
Under the box titled, “The following network components are
installed,” verify that the Client for Microsoft Networks is listed. If it
is not, click on ADD, then select CLIENT, then click ADD again.
Select Microsoft followed by Client for Microsoft Networks and
finally the OK button. You will need your Windows 95 CD if it is not
already copied onto your system.
b.
Under the same box titled, “The following network components are
installed,” make sure that NetBEUI is not installed. To verify this, scroll
down through the list box and look for any lines that have NetBEUI in
them. If there are any lines that include NetBEUI, click on the line,
and then click on the Remove button. This forces the Network
Neighborhood to use NetBIOS over TCP/IP, which is compatible with the
Extranet Switch.
c.
Under the Identity tab, configure the Workgroup to be the same as your
company’s internal workgroup. For example, “Nortelnetworks.”
d.
Next under the Identity tab, verify that the Computer Name is different
from your PC at work. Otherwise, you would be attempting to log a
second unit with the same name onto the network.
e.
If you have made any changes in the Network Control Panel, click OK,
and then reboot the system.
f.
Double-click on the Extranet Connection Manager icon.
g.
Enter a new Connection Profile Name.
h.
Create a new Dial-up Connection.
i.
Click the Tool button (next to the Dial-up Connection list box), select
New, and follow the wizard.
j.
Create a new Extranet Connection.
k.
Click the Tool button (next to the Extranet Connection list box), select
New IPsec Connection, and follow the wizard.
l.
Click the Connect button.