Filter
Top Products
Extranet Access Client Installation
5-3
Windows 98 and Windows NT 4.0
To install the Nortel Networks Extranet Access Client onto a Windows 98 PC or
Windows NT 4.0 workstation, you must copy the Extranet Access Client
(Eac_25d.exe) that is on the Contivity Extranet Switch CD in the Client folder
onto your hard drive.
1.
Install Eac_25d.exe by double-clicking on the program name. The
installation is self explanatory. As prompted at the end of the installation,
reboot your system.
2.
If using the Extranet Access Client over a dial-up connection:
• Windows 98: Under the Network Control Panel (from the Start menu,
select Settings → Control Panel), select Add → Adaptor → Microsoft
→ Dial-up Adaptor.
• Windows NT: Install the Remote Access Service under the Network
Control Panel (from the Start menu, select Settings → Control Panel,
then double-click on the Network icon to open the Network Control
Panel). Select the Services tab and click on Add. Scroll down to select
“Remote Access Service” and click OK.
3.
Under the Protocols tab for Windows NT or under the Network Control Panel
for Windows 98, verify that NetBEUI is not installed. If NetBEUI is listed,
click on it, then click on the Remove button. This will force the Network
Neighborhood to use NetBIOS over TCP/IP, which is compatible with the
Switch. Click the OK button and reboot your system.
4.
Double-click on the Extranet Connection Manager icon.
a.
Enter a new Connection Profile Name.
b.
Create a new Dial-up Connection.
c.
Click the Tool button (next to the Dial-up Connection list box), select
New, and follow the wizard.
d.
Create a new Extranet Connection.
e.
Click the Tool button (next to the Extranet Connection list box), select
New IPsec Connection, and follow the wizard.
f.
Click the Connect button.