Filter
Top Products
Getting Started with the Contivity Extranet Switch 4500
4-6
Register Online
Click to register the Switch with Nortel Networks. It will only take a few minutes
and it will give you access to the latest software and technical tips. Your Switch
requires Internet access in order to register.
Logging in and Supplying a Password
Start up a Web browser and enter your Switch's Management IP Address. Select
an option in the navigational menu and submenu, and then you are prompted for
the Login and Password. Enter the system default Login and Password in
lowercase characters, as follows:
Login:
admin
Password:
setup
IMPORTANT:
If you change your password and later need to access the
Serial Interface Configuration, you must then enter the
modified password. The factory default password is no
longer valid in this case.
Also, make sure you change the default Administrator's Login and
Password as soon as possible (refer to the Admin
→
Administrator
display.) You should then guard the Login and Password carefully.