Filter
Top Products
Changing Hardware Configurations
7-3
Installing Option Cards
The following illustration shows you how install LAN or WAN option cards into
the Switch. You can use Slots 1 to 6 for any mix of LAN and WAN cards;
however, you must populate the slots from Slot 1 to Slot 6, in that order.
Figure 7-2. Installing LAN or WAN Cards
CAUTION:
Be careful when inserting option cards, as the slide-out tray is not
fully supported once pulled out. You should support the back of the
tray with your hand while inserting an option card.
6
5
4
3