Filter
Top Products
Mediant 2000 SIP User’s Manual 11. SNMP-Based Management
Version 4.4 175 July 2005
Note: The acBoard MIB is still supported but is being replaced by five newer
proprietary MIBs.
The acBoard MIB has the following groups:
boardConfiguration
boardInformation
channelConfiguration
channelStatus
reset
acTrap
As noted above, five new MIBs cover the device’s general parameters. Each contains a
Configuration subtree for configuring related parameters. In some, there also are Status and
Action subtrees.
The 5 MIBs are:
1. AC-ANALOG-MIB
2. AC-CONTROL-MIB
3. AC-MEDIA-MIB
4. AC-PSTN-MIB
5. AC-SYSTEM-MIB
Other proprietary MIBs are:
• acGateway MIB - This proprietary MIB contains objects related to configuration of the device
when applied as a SIP or H.323 media gateway only. This MIB complements the other
proprietary MIBs.
The acGateway MIB has the following groups:
Common - for parameters common to both SIP and H.323
SIP - for SIP parameters only
H.323 - for H.323 parameters only
• acAtm - This proprietary MIB contains objects related to configuration and status of the
device when applied as an ATM media gateway only. This MIB complements the other
proprietary MIBs.
The acAtm MIB has the following groups:
acAtmConfiguration - for configuring ATM related parameters
acAtmStatus - for the status of ATM connections
• acAlarm - This is AudioCodes' proprietary carrier-grade alarm MIB. It is a simpler
implementation of the notificationLogMIB and the IETF suggested alarmMIB (both also
supported in all AudioCodes’ devices).
The acAlarm MIB has the following groups:
ActiveAlarm - straightforward (single-indexed) table, listing all currently active alarms,
together with their bindings (the alarm bindings are defined in acAlarm.
acAlarmVarbinds and also in acBoard.acTrap. acBoardTrapDefinitions.
oid_1_3_6_1_4_1_5003_9_10_1_21_2_0).
acAlarmHistory - straightforward (single-indexed) table, listing all recently raised alarms
together with their bindings (the alarm bindings are defined in acAlarm.