Filter
Top Products
– 38 –
10-6. Reliability Specications
(1) MCBF: 60 million lines
• Recommended thermal paper (60 μm to 75 μm)
•
Average printing rate: 12.5%
• Printing density: standard setting
Note: The Mean Cycles Before Failure (MCBF) with the recommended thermal paper
thickness between 75 μm and 150 μm is 25 million lines.
(2) Auto cutter (life)
Paper width 82.5 mm, 79.5 mm *Including backing paper
• Paper thickness between 65 μm and 100 μm: 2 million partial cuts, 1.6 million full cuts
•
Paper thickness between 100 μm and 150 μm: 600,000 cuts both partial and full
Paper width 57.5 mm
•
Paper thickness between 65 μm and 85 μm: 600,000 partial cuts, 500,000 full cuts
Paper width 82.5 mm, 79.5 mm full-face thermal label paper
•
Paper thickness between 100 μm and 150 μm: 300,000 cuts both partial and full
Notes:
1) When using full-face thermal label paper, periodically clean the glue that may have
accumulated on the cutter blade.
2) If glue has accumulated on the cutter blade, it could adversely affect cutting perform
-
ance.
* A cutter is said to have reached its life when it has entered the wear failure pe
-
riod.
* The gures indicated in the reliability specications above are based on the use of
recommended thermal paper. As such, reliability is not guaranteed if non-recom-
mended thermal paper is used.