Filter
Top Products
– 43 –
11-2. RS-232C Interface Model
ON ON
OFF OFF
DIP-SW 1
Switch 1-1 Command emulation
ON Star Mode
OFF ESC/POS Mode
The factory settings of DIP switch are all on.
The functions of switches 1-2 through 1-10 will change according to the command emulation
that has been set using switche
1-1.
(1) Star mode
Switch Function ON OFF
1-1
Command emulation Always ON
1-2
Should not be changed (Should be set to on)
1-3
Should not be changed (Should be set to on)
1-4
Sensor adjustment Invalid Valid
1-5
Should not be changed (Should be set to on)
1-6
Handshaking conditions
(conditions for BUSY)
Ofine or receive
buffer full
Receive buffer full
1-7
Automatic status back function Invalid Valid
1-8
Should not be changed (Should be set to on)
1-9
Low-power consumption mode Invalid Valid
1-10
Should not be changed (Should be set to on)
(2) ESC/POS mode
Switch Function ON OFF
1-1
Command emulation Always OFF
1-2
Graphic adjustment 203 DPI 180 DPI
1-3
Should not be changed (Should be set to on)
1-4
Sensor adjustment Invalid Valid
1-5
Should not be changed (Should be set to on)
1-6
Handshaking conditions
(conditions for BUSY)
Ofine or receive
buffer full
Receive buffer full
1-7
Automatic status back function Invalid Valid
1-8
Should not be changed (Should be set to on)
1-9
Low-power consumption mode Invalid Valid
1-10
Should not be changed (Should be set to on)
No. 1 2 3 4 5 6 7 8 No. 1 2 3 4
9 10
DIP-SW 1 DIP-SW 2