Oki 4M Printer User Manual


 
6 - 3
Status
Code
Category Status Message Display Content Remedy
Table 6-1
Warming-up status
Online (ready) status
Power save status
The toner amount of the toner cartridge is small.
The EP unit is not installed or the toner sensor is
faulty.
Life of EP drum
The paper is in the manual feed mode.
Printing in progress
Ejection in progress
Request the paper to be set in the manual feed
mode.
The paper sizes are as follows:
Executive, Letter, Legal 14, Legal 13, A4, A5, A6,
B5, Monarch, DL, C5, COM-10, COM-9
Normal status 18 00
00 10
00 20
10 00
10 01
10 02
12 20
14 20
14 30
16 01
16 02
16 03
16 04
16 18
16 19
16 1A
16 21
16 50
16 51
16 5A
16 5B
16 7F
Normal operation
Normal operation
Normal operation
Normal operation
Replace the toner cartridge.
Install the EP unit or replace the toner sensor.
Replace the EP unit.
(
Note:
Be sure to reset the drum counter after replacing the
EP unit.)
Normal operation
Normal operation
Set the requested paper in the manual feed mode.
Warming Up
Online (Ready)
Power Save Mode
Toner Low
Toner Sensor
Change Drum
Manual Paper In
Printing In Progress
Ejection In Progress
Manual Request
Executive
Letter
Legal 14
Legal 13
A6
A5
A4
B5
Monarch
COM-10
DL
C5
COM-9